The Menu System
The Screen Menu
The SCREEN menu allows you to set the monitor to automatically
select the correct mode for viewing a particular movie and to change
the positions of on-screen menus.
Selecting
a Viewing
Size
When viewing with a component
other then your HD receiver*, you can set the screen mode to one of four screen sizes to suit the type
of input you are watching.
Select the screen mode with the CINEMA button
on the remote. The screen sizes are as follows:
Fill
Norm_l
Full
Stadium
FILLexpands
in both vertical and horizontal
directions
while the correct
proportions
are
maintained.
The picture
is not distorted,
just closer.
NORMAL displays a picture
with a 4:3 aspect
ratio (standard
video). Because this mode
fills the screen vertically,
but not horizontally,
black bars will appear on the right and left
sides of the picture.
No re: If viewing with a 4.3 aspect to rio for long periods of time, set side gray level a t 3 or 4.
FULLexpands
the picture
in the horizontal
direction
only. This option
corrects
the aspect
ratio of images that have been compressed
or horizontally
"squeezed."
STADIUMexpands horizontally - the center of the picture is almost normal while the
edges are considerably expanded. This mode is intended for watching video with a 4:3
aspect ratio on a wide screen.
Note: In Stadiummode,only the V-position and N-position are displayed.Youcan't change the
height and width.
24
Chapter 2
Need help?
Do you have a question about the Scenium PHD50400 and is the answer not in the manual?
Questions and answers