Selecting The Input Signals To Be Displayed; On-Screen Menu Operation - RCA Scenium PHD50300 User Manual

Hd plasma display

Hide thumbs Also See for Scenium PHD50300:

Table of Contents

The Menu System

Selecting the Input Signals to be displayed

To change the input signals displayed in multiscr e en operations:

VIDEO1

The top screen shows VIDEO1 as the

active picture. The bottom screen shows

VIDEO2 as the active picture.

To access the main menu, pr e ss the MENU button on the r e mote. The MAIN MENU is displayed on

the screen. The main menu contains a list of all the menus that contr ol your monitor. To select a

menu, use the up/down arr o w buttons on the r e mote to highlight the desir ed menu. When the

desired menu is highlighted, pr e ss the OK or MENU button to select.

Note: Different components use different types of input (RGB, video, etc). Some menu

options apply to only one type of input, so they only appear when they apply to the currently

active input. For example, the COLOR and TINT options in the PICTURE QUALITY menu only

appear when you are adjusting standard video input (VIDEO1, VIDEO2, VIDEO3).

1. Press the MULTI button to activate the Multiscr e en function. Press the

OK button to make the desir e d picture active.

2. Press the RGB, VIDEO or CMPNT button to change the input signal.

VIDEO2

The INPUT•GO BACK button on the fr o nt of the monitor can also

be used to change input selection.

VIDEO2

Chapter 6

Table of Contents