Table of Contents
Advertisement
The Menu System
To change the viewing size:
1. Press the CINEMA button on the remote control.
2. The current viewing size will be displayed. Press the CINEMA button again to switch to the next size. The
size switches as follows:
y FILL
NORMAL
FULL
STADIUM
*Note: When viewing with an bid receivet, use the receiver's screen format selections to set the proper _atio.
The SCREEN menu with the MODE option highlighted.
TheAUTO PICTURE option onlyappears ifyou havea
computerconnected.
Adjusting the Picture Position and Size
TheSCREEN menu lets you adjust the position and size of the picture.
The first two options, V-POSITION and H-POSITION, adjust the placement of the
picture on the screen. For example, if the picture is too far to the left, you can use
the H-POSITION to move it to the right. To adjust the position of the picture on
the screen:
1. From the main menu, highlight
and select the SCREENoption. The SCREEN
menu is displayed.
2. Use the s and t buttons to select the mode you want to change.
3. When the desired mode is highlighted,
press the • button. The selected mode
screen will be displayed.
Use the arrow buttons to adjust the position of the picture.
NOTE: If you don't push the an arrow button within 5seconds,the current setting is accepted
and the previousscreenreappears.
4. When you've adjusted to the desired setting, press the GO BACK button on the
remote to return to the SCREENmenu.
The V-HEIGHT and H-WIDTH options expand and contract the size of the
picture to fill the screen. For example, if the picture is slightly wider than the
screen, you can use the H-WIDTH option to shrink the picture horizontally.
Note: These options are not available inSTADIUM mode.
To adjust the screen size:
1. Select the desired option from the screen menu and press the • button. The
selected mode window will be displayed.
2. Use the arrow buttons to adjust the size of the picture.
NOTE: If you don't push an arrow button within 5 seconds, the current setting
is accepted and the previous screen reappears.
3. When you've adjusted to the desired setting, press OK to select and return to
the SCREENmenu.
Auto Picture
The AUTOPICTUREfunction appears in the SCREENmenu only if you have a computer connected to the monitor. When this feature is
turned on, it automatically adjusts flickering and striped patterns in a computer image. If you want to adjust these manually:
1. Select the AUTOPICTURE option from the SCREEN menu. Press the • button to turn AUTOPICTURE off. When AUTOPICTURE is
turned off, the FINEPICTURE and PICTURE ADJ.options arc displayed beneath it.
2. Select an option and pressthe • button. The screenfor that option will be displayed. Use the • and • buttons to adjust that
option. PressOK to return to the SCREEN menu.
Chapter 2
25
Advertisement
Table of Contents
