Table of Contents
Advertisement
THE MENU
SYSTEM
NAVIGATING
THE MENUS
You can adjust monitor
options through
the Cinema
Screen monitor's
menu system. To access the main menu, press the MENU
button on the
remote control
or MENU • OK on the front of the monitor.
There are a few things you need to know to navigate
through
the menu
system. The navigation
buttons are the set of arrow-shaped
buttons
in the
middle
of the remote
(See illustration
on right).
Use the • and •
buttons on the remote to move the menu highlight
up and
down.
Use the •
and • buttons
to move the highlight
and change settings.
Press the GO BACK button on the remote to return to a previous
menu.
You can return the Cinema
Screen monitor
to the factory settings at any
time by using the RESET option
in the OPTIONS
menu. Remember,
if you
choose to reset, ALL settings will return to the factory
settings.
GUIDE
INFO
0
MEND
CLEAR
These are the buttons on the remote
you use to navigate through the
monitor's on-screen menu system.
ON-SCREEN
MENU
OPERATION
To access the main menu, press the MENU
button on the remote. The
MAIN
MENU
is displayed
on the screen. The main menu contains
a list of
all the menus that control
your monitor.
To select a menu, use the up/down
arrow buttons
on the remote to highlight
the desired
menu. When the
desired
menu is highlighted,
press the OK or MENU
button to select.
Note: Different components use different types of input (RGB,
video, etc). Some menu options apply to only one type of input, so
they only appear when they apply to the currently active input. For
example, the COLOR and TINT options in the PICTURE QUALITY
menu only appear when you are adjusting standard video input
(VIDE01, VIDE02, VIDE03).
This is the main menu with the PICTURE Quality
option highlighted. Press OK to bring up the
highlighted menu.
23
Advertisement
Table of Contents
