Troubleshooting - RCA Scenium PHD50400 User Manual

Thomson
Hide thumbs Also See for Scenium PHD50400:
Table of Contents

Advertisement

Troubleshooting
Before requesting service, check the adjustments, operations, etc,
Symptom
Possible Problem
Solutions
Picture is disturbed,
• Is a connected component set directly in front
• Leavesome space betweenthe display and
Sound is noisy
or at the side of the monitor?
connected components.
Remote control unit operates erroneously.
The remote control does not work.
• Remote control batteries may be dead.
• Replaceboth batteries with new ones
° Remote may be in wrong mode.
° Presscomponent button for desiredcomponent,
Monitor's power does not turn on when the
remote control's power button is pressed.
Monitordoesnotoperatewhenthe remote
control'sbuttonsarepressed.
Nosoundor pictureis produced,
Pictureappears but no soundis produced,
Tintis pooror colorsare weak,
Nothingappears on screen,
• Is the monitoCs powercordpluggedintoa
poweroutlet?
• Are all the monitor'sindicatorsoff?
• Is the remote control pointed at the monitor,
or is there an obstacle between the remote
control and the monitor?
• Plugthe monitor'spowercordinto a power
outlet,
° Pressthe power button on the monitor to turn
on the power.
• Pointthe remotecontrolatthe monitor's
remote control sensorwhenpressingbuttons,
or removetheobstacle,
• Is direct sunlight or strong artificial light
• Eliminate the light by closing curtains, pointing
shining on the monitor's remote control
the light in a different direction, etc,
sensor?
• Remote control batteries may be dead.
• Is the monitoCs powercordpluggedintoa
poweroutlet?
• Is the source videoconnected and on?
° Is the volume set at the minimum?
° Is the mute mode set?
° Are the speakers properly connected?
° Are the tint and colors properly adjusted?
• Is the computer'spowerturnedon?
• Is a videosourceconnected?
• Is the powermanager f unctionin the
STANDBY o r OFF mode?
° Is the picturepositionadjusted correctly?
• Replaceboth batteries with new ones,
• Plug the monitor's power cord into a power
outlet,
• Make sure source video (VCR, DVD, DTC) is
connected and turned on.
• increasethe volume,
• Pressthe remote control's mute button.
• Connect the speakers properly.
• Adjust the tint and color (under PICTURE),
• Return to factory reset.
• Turn on the computer's power.
• Connect video source to the monitor.
° Operate the computer (move the mouse, etc.),
PaRof pictureis cut off or pictureis
• Adjustthe picturefrom the SCREEN menu.
not centered.
imageis too largeortoo small,
• is thescreen sizeadjusted correctly?
Pictureis unstable.
• Is the computer set at the correct resolution?
• Is the HD receiverset to the correct mode?
• Press the WIDE/AUTO WIDEbutton onthe
remote control andadjustproperly.
• Setto the properresolution,
• SetHD receiver t o the correctmode.
CIm,E_T' L
41

Advertisement

Table of Contents
loading

Table of Contents