Table of Contents
Advertisement
Setting the video signal format
Use these operations to set the video signal format.
Example: Setting the video signal format to "3.58
NTSC"
Press the PROCEED
button on tlle remote control to
display the MAIN MENU on the screen, then...
1. Use the • and • buttons to select "INFORMATION",
then press the MENU/ENTER button.
The "INFORMATION"
screen appears.
2. Use the • and • buttons to select"COLOR SYSTEM",
then press the MENU/ENTER
button.
The "COLOR SYSTEM" screen appears.
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
The color system is set to "3.58 NTSC".
Information
• Video signal formats
Different countries
use different formats for video
signals. Set to the format used in your current country.
AUTO I/2 ......... The video signals are automatically
detected
and the format
is set
accordingly.
AUTO1:3.58NTSC,
4.43 NTSC, PAL, SECAM,
PAL60
AUTO2: PAL-M, PAL-N, 3.58NTSC
PAL (B, G) ...... This is the standard
format used
mainly in the United Kingdom and
Germany.
SECAM ............. This is the standard
format used
mainly in France and Russia.
4.43 NTSC,
PAL60 .............
This format is used for videos in
countries
using PAL and SECAM
video signals.
3.58 NTSC ..... This is the standard
format used
mainly in Japan and the United States.
PAL-M .............
This is the standard
format used
mainly in Brazil.
PAL-N .............
This is the standard
format used
mainly in Argentina.
3.
Ib select "3.58 NTSC"...
Use the 4 and F buttons to select "3.58 NTSC".
The mode switches as follows when the 4
and
buttons are pressed:
Auvol Auvo2- . 8.vsc -4.4 .vsc
SECAM
*_PAL-M
_PAL-N
*_PALd0
*_PAL -_
4O
Advertisement
Table of Contents
