Table of Contents
Advertisement
Setting MONITORLINK (M-LINK) ADJ.
When the picture input from the MONITORLINK
input
terminal is distorted, select the most appropriate setting
from among "1", "2", and "3".
Example: Setting "2"
Press" the MENU/ENTER
button
on the remote control
to
display MAIN
MENU on the screen, then...
1. Use the • and • buttons to select "FUNCTION",
then press the MENU/ENTER button.
The "FUNCTION" screen appears.
2. Use the • and • buttons
to select "M-LINK
ADJ?'.
Reducing uneven aging of the screen
The brightness of the screen, the position of the picture,
positive/negative
mode and screen wiper are adjusted to
reduce uneven phosphor aging of the screen.
Example: Setting "PLE" to "LOCK"
Press the MENU/ENTER
button on the remote control
to
display
the MAIN
MENU on the screen,
then proceed
as
./bllows.
1. Use the • and • buttons to select "FUNCTION",
then
press the MENU/ENTER button.
The "FUNCTION" screen appears.
2. Use the • and • buttons to select "LONG LIFE", then
press the MENU/ENTER button.
3. To select "2 "...
Use the 4 and !' buttons to select "2".
The mode switches as follows each time the4
or i'
buton is pressed:
[_ 1'-_2 *-'3
The "LONG LIFE" screen appears.
3. Use the • and • buttons to select "PLE".
4. Once the setting is"completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
•
NOTE:
M-LINK ADJ is available
only after
proprietary tuner/controller
has been connected.
• When you adjust the M-LINK ADJ.
The position of the menu display will change. In such
a case, be sure to adjust the position.
• Restoring the factory
default settings
To restore the original factory settings, go back to the
MAIN MENU.
Select "FUNCTION,"and
then select
"RESET". Note that this also restores other settings to
the factory defaults.
4. Use the 4 and k buttons
to select "LOCK",
The mode
switches
as follows
each time the 4
or
i'button
is pressed:
AUTO
*-'LOCK
32
Advertisement
Table of Contents
