Table of Contents
Advertisement
Adjusting the color to the desired quality
Use this procedure to adjust the white balance for bright
pictures and dark pictures to achieve the desired color
quality.
Example: Adjusting the "WHITE BALANCE"
Press the MENU/ENTER
button on the remote control
to
display
the MAIN MENU
on the screen,
then...
4. Press the MENU/ENTER
button.
The "WHITE BALANCE" screen appears.
5. Use the • and • buttons
to select "RED-GAIN".
1. Use the •
and •
buttons
to select
"VIDEO
SETTINGS", then press the MENU/ENTER button.
The "VIDEO SETTINGS" screen appears.
2. Use the • and • buttons to select "COLOR TEMR".
6. Adjust the white balance using the 4 and P" buttons.
3. Use the 4 or P" buttons to select "CUSTOM".
The mode switches as follows when the 4 and)' buttons
are pressed:
F_HIGH *-*MEDIUM *-*LOW *-*CUSTOM _-_
* if neither the 4 or P"button is pressed within 5 ,seconds,
the current selection is sel and the previous ,screenreappears.
* if neither the4
or P" button is pressed within 5 seconds,
the current setting is set and the previous screen reappears.
7. Once the adjustment is"completed...
Press the EXIT button several times to return to the
main menu. To delete the main menu, press the EXIT
button once more.
Information
• Adjusting the white balance
RGB-GAIN ....... White balance adjustment for signal
level
RGB-BIAS ...... White balance adjustment for black
level
•
Restoring the factory
default settings
To restore
the original
factory
settings,
go back to the
MAIN
MENU.
Select "FUNCTION,"and
then select
"RESET".
Note that this also restores other settings
to
the factory defaults.
23
Advertisement
Table of Contents
