Table of Contents
Advertisement
Options Setting Menu
Setting the allocation of the audio connectors
Setting
the AUDIO
1, 2, and 3 connectors
to the desired
picture
input.
Example: Setting "AUDIO 1" to "VIDEO 2"
Press the MENU/ENTER
button on the remote control
to
display
the MAIN MENU
on the screen,
then...
1. Use the • and • buttons to select "OPTIONS", then
press the MENU/ENTER button.
The "OPTIONS" screen appears.
2. Use the • and •
buttons
to select "AUDIO
1".
Setting the BNC connectors
Select whether to set the input of the 5 BNC connectors to
RGB or component video.
Example: Set the BNC SELECT mode to "COMP."
Press the MENU/ENTER
button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the • and • buttons to select "OPTIONS", then
press the MENU/ENTER button.
The "OPTIONS" screen appears.
2. Use the • and • buttons
to select "BNC SELECT".
3.7"0 set the A UDIOI
to "V1DE02
"...
Use the 4 and P" buttons
to select"VIDEO2".
The mode switches
as follows
each time the 4
or P"
button
is pressed:
"_VIDEO1_VIDEO2 _VIDEO3 _HD/DVD _RG_/PCI_RGB/PC2
_M-LINK _'_
* M-LINK is available only after proprietary tuner/
controller has been connected.
3. Ib set the BNC SELECT
mode to "COMP. "...
Use the 4 and _buttons
to select "COME".
The mode switches
as follows
each time the 4 or P"
button
is pressed:
7RGB_COMP.
<_
4. Once the setting is completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
• AUDIO INPUT
A single audio input cannot be selected as the audio
channel for more than one input terminal.
• Restoring the factory default settings
To restore the original factory settings, go back to the
MAIN MENU. Select "FUNCTION,"and
then select
"RESET". Note that this also restores other settings to
the factory defaults.
4. Once the setting & completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
• BNC SELECT
RGB ...............
Use the BNC terminals for a RGB
or
RGBHV input.
COM P. ............
Use the BNC terminals for component
input.
• Restoring the factory default settings
To restore the original factory settings, go back to the
MAIN MENU. Select "FUNCTION,"and
then select
"RESET". Note that this also restores other settings to
the factory defaults.
36
Advertisement
Table of Contents
