Resetting To The Default Values - Mitsubishi PD-5010 Owner's Manual

The 2ndlineof the "WORKING TIME":
oM. 3M ..... sT•
The 1st line of the "WAITING TIME":
_0H *_IH _2H *-,3H_... _12H
The 2nd line of the "WAITING TIME":
_0M _3M _6M _9M_... _57M<_
"SPEED"
6. Once the setting is completed...
Press the EXIT button several times to return to the
main menu.
To delete the main menu, press the EXIT button once
more.
Resetting to the default values
Use these operations to restore all the picture adjustments
and audio settings to the factory default values.
Refer to page 19 for items to be reset.
Press the MENU/ENTER button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the • and • buttons to select "FUNCTION", then
press the MENU/ENTER button.
The "FUNCTION" screen appears.
2. Use the • and • buttons to select "RESET", then press
the MENU/ENTER button.
Information
• Setting the time
WORKING TIME
Set the length of time the "SCREEN WIPER" mode
lasts.
When the WORKING TIME is set to "ON", the
"SCREEN WIPER" mode stays in the "ON" state.
WAITING TIME
Set the length of time until the "SCREEN WIPER"
mode starts.
SPEED
Set the moving speed for the "SCREEN WIPER". The
speed decreases as the number increases.
* The "WORKING TIME" and "WAITING TIME" can
be set for up to 12 hours and 45 minutes in units of 3
minutes.
1To select "ON" for the "WORKING TIME"...
Set the hours of the WORKING TIME to OH and the
minutes to 0M. "ON" will be displayed.
The "RESET" screen appears.
3. Use the • and • buttons to select"RESET", then press
the MENU/ENTER button.
When the "SETTING NOW" screen disappears, the
screen will be restored to the previous "RESET" mode,
then all the settings are restored to the default values.
4. Once the setting is completed...
Press the EXIT button.
To delete the main menu, press the EXIT button once
more.
35