Operating The Display; Setting Up The Display; Turning Display On And Off - Mitsubishi Diamondview DV75UM User Manual

Operating the Display

Setting up the Display

Step 1: Plug in the power cable and turn on the AC power switch (without turning on the signal source
device(s)).
Step 2: Plug in the signal source cables.
Step 3: Press the power key on the display's keypad or the power key on the remote control to turn on the
display.
Step 4: Turn on the power of the signal source device(s) to begin sending a signal to the display.
"I" is power on
"O" is power off
14