Inspection Of Plug & Play Communication And Osd "Monitor Information" For Model Name/ Serial Number; System Connection; Input Signal; Programs Required - Mitsubishi E55LCD Service Manual

5. Inspection of PLUG & PLAY Communication and OSD "MONITOR INFORMATION"
for Model Name/ Serial Number

5.1 System Connection

This system should be connected as shown below.
Program Disk
Part No. 599910593
DESKTOP/NOTE
Signal Generator

5.2 Input Signal

Horizontal sync frequency: Not specified.
Vertical sync frequency: Not specified.

5.3 Programs Required

NPGV233.EXE
E55LCD.BAT
E55LCD.TXT

5.4 Inspection Procedures

a. Factory Mode: Press
b. A "Menu" button is pressed and the "EEP WRITE PROTECT" menu is displayed.
Printer Cable
PC
Signal Cable
"Menu" and
Part No.599910508
Signal Cable
EDID JIG
(NPG)
EDID JIG (NPG)
"Select" button at the same time then power ON.
5-8
Monitor