Table of Contents
Advertisement
Monitor Settings Menu
3. Adjust
using the < or P" buttons.
Adjusting the Position, Size, Fine Picture, Picture Adj
The position of a computer image can be adjusted and
flickering of the image can be corrected.
Example: Adjusting the vertical position in the normal
mode
First,
select
the image./?om
your
computer:
Press
the
MENU/ENTER
button
on the remote
control
to display
the MAIN MENU on the screen, then...
1. Use the •
and •
buttons
to select "MONITOR
SETTINGS",
then press the MENU/ENTER
button.
The "MONITOR SETTINGS" menu appears.
Default settings (when RGB/PC is selected)
* If neither the 4 or P"button is pressed within 5 seconds,
the current setting is set and the previous screen reappears.
7"0continue
making
other computer
image
adjustments
...
Repeal from step 2.
4. Once all adjustments are completed ...
Press lhe EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
* The ,settings on the SCREEN menu are not preset at the
factory.
]b select a mode ...
Use the 4 and P" buttons
to select a mode.
The mode switches as follows when the4
and P"buttons
are pressed:
_NARROW _
STANDARD
* The mode can also be switched by pressingthe"FORMAT"
bulmn on the remote control.
2. ]b adjust
the vertieal position
...
Use the • and • buttons
to select "V-POSITION".
Information
• When "AUTO PICTURE" is "OFF"
When Auto Picture is off, the Fine Picture and the
Piclure ADL items are displayed so that you can adjust
them.
26
Advertisement
Table of Contents
