Table of Contents
Advertisement
Setting the color temperature
Use this procedure to set color tone produced
by the
plasma display.
Example: Setting "LOW"
Press the MENU/ENTER
button on the remote control to
display the MAIN MENU on the screen, then...
1. Use the •
and •
buttons
to select
"VIDEO
SETTINGS", then press the MENU/ENTER button.
The "VIDEO SETTINGS" screen appears.
2. Use the • and • buttons to select "COLOR TEME".
4. Once the setting is"completed...
Press the EXIT button to return to the main menu.
To delete the main menu, press the EXIT button once
more.
Information
• Setting the color temperature
HIGH ..............
Whites appear more bluish
MEDIUM ........... Standard
LOW ...............
Whites appear more reddish
• Restoring the factory
default settings
To restore the original factory settings, go back to the
MAIN MENU. Select "FUNCTION."
and then select
"RESET".
Note that this also restores other settings to
the factory defaults.
3. Use the 4 and
)" buttons
to select "LOW".
The mode switches
as follows
when
the 4
and
buttons
are pressed:
F > HIGH *'*MEDIUM *'LOW
*'*CUSTOM
* See page 23 to set "CUSTOM".
* If neither the 4 or Fbutlon is pressed within 5 seconds,
the current selection is set and the previous screen
reappears.
22
Advertisement
Table of Contents
