Table of Contents
Advertisement
5. Once the setting is completed...
Press the EXIT button to return to the FUNCTION
menu.
To exit the main menu, press the EXIT button twice.
Information
• PEAK LUMINANCE ENHANCEMENT
(PLE)
AUTO ............. The brightness
of the screen
is
adjusted
automatically
to suit the
picture quality.
LOCK .............
The brightness
level
is set to
minimum.
• ORBITER
OFF ................
Orbiter mode does not function.
ON ..................
The picture gradually moves around
the screen to reduce the impact of
uneven aging.
• INVERSE
OFF ................
Inverse mode does not function.
ON ..................... The picture is displayed alternately
between positive image and negative
image.
You can set the time by pressing the
MENU/ENTER
button while "ON"
is set.
WT ..................
The entire screen turns white.
You can set the time by pressing the
MENU/ENTER
button while "ON"
is set.
• SCREEN WIPER
OFF ................
Screen wiper mode does not function.
ON ..................
Repeatedly moves the white vertical
bar from the left end of the screen to
the right end at a constant speed.
You can set the time by pressing the
MENU/ENTER
button while "ON"
is set.
• Restoring the factory default settings
To restore the original factory settings, go back to the
MAIN MENU. Select "FUNCTION,"and
then select
"RESET".
Note that this also restores other settings to
the factory defaults.
* The PLE and ORBITER can only be adjusted when an
RGB signal is displayed.
Setting the time for "INVERSE"
Set the "INVERSE"
or "WHITE" display time and the
"WAITING TIME".
Example: Setting so that the INVERSE mode cycles
on for 90 minutes and offfor 30 minutes.
1. Use the • and • buttons to select "FUNCTION", then
press the MENU/ENTER
button.
The "FUNCTION"
screen appears.
2. Use the • and • buttons to select "LONG LIFE", then
press the MENU/ENTER
button.
3. Use the • and •buttons
to select "INVERSE",
then
use the 4 and P" buttons to select "ON".
4. Press the MENU/ENTER button.
The "INVERSE/WT"
screen appears.
5. Adjust
the time using the 4 and P" buttons
and the •
and •
buttons.
The mode switches
as follows
each time the • or •
button is pressed.
The 1st line of the "WORKING
TIME":
r_ON or OH *_IH *_2H *_3H .....
12H+_
L
J
33
Advertisement
Table of Contents
