Video Settings Menu; Adjusting The Picture; Setting The Picture Mode According To The Brightness Of The Room - Mitsubishi PD-5030 Owner's Manual

VIDEO Settings Menu

Adjusting the picture

The contrast, brightness, sharpness, color and tint can be
adjusted as desired.
Example: Adjusting the contrast
1. On the MAIN MENU, select "VIDEO SETTINGS",
then press the MENU/ENTER button.
The "VIDEO SETTINGS" screen appears.
2. Use the ▲ and ▼ buttons to select "CONTRAST".
VIDEO SETTINGS
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
SEL. ADJ.
3. Use the and buttons to adjust the contrast.
CONTRAST
* If neither the or button is pressed within 5 seconds,
the current setting is stored into memory and the previous
screen reappears.
Note: If "CAN NOT ADJUST" appears ...
When trying to enter the VIDEO SETTINGS submenu,
make sure PICTURE MODE is not set to DEFAULT.
Information
Video settings screen
CONTRAST .... Changes the picture's white level.
BRIGHTNESS .. Changes the picture's black level.
SHARPNESS .. Changes the picture's sharpness.
Adjusts picture detail of VIDEO
display.
COLOR ........... Changes the color density.
TINT ................ Changes the picture's tint. Adjust for
natural colored skin, background, etc.
Adjusting the computer image
Only the contrast and brightness can be adjusted when
a computer signal is connected.
Restoring the factory default settings
Select "DEFAULT" under the "PICTURE MODE"
settings.
1 / 2
: NORMAL
: OFF
EXIT RETURN
Setting the picture mode according to the
brightness of the room
There are four picture modes that can be used effectively
according to the environment in which you are viewing
the display.
Example: Setting the "THEAT. 1" mode
1. On the MAIN MENU, select "VIDEO SETTINGS",
then press the MENU/ENTER button.
The "VIDEO SETTINGS" screen appears.
2. Use the ▲ and ▼ buttons to select "PICTURE MODE".
CONTRAST
BRIGHTNESS
SHARPNESS
COLOR
TINT
PICTURE MODE
NR
NEXT PAGE
SEL.
3. To set to "THEAT. 1" ...
Use the and buttons to select "THEAT. 1".
The mode switches as follows each time the
button is pressed:
→ BRIGHT ↔ NORMAL ↔ THEAT. 1 ↔ THEAT. 2 ↔ DEFAULT ←
PICTURE MODE
* If neither the or
the current selection is stored into memory and the
previous screen reappears.
Information
Types of picture modes
THEAT. 1, 2 ...... Select this mode when watching video
in a dark room.
This mode provides darker, finer
pictures, like the screen in movie
theaters.
For a darker image, select THEAT. 2.
NORMAL ......... Select this mode when watching video
in a bright room.
This mode provides dynamic pictures
with distinct differences between light
and dark sections.
BRIGHT ........... This mode provides brighter pictures
than NORMAL.
DEFAULT......... Use this to reset the picture to the
factory default settings.
16
VIDEO SETTINGS 1 / 2
: NORMAL
: OFF
ADJ. EXIT RETURN
: THEAT. 1
button is pressed within 5 seconds,
or