Cycles - Maytag PERFORMANCE SERIES Use & Care Manual

Delicate
Use this cycle to wash no-iron fabrics and garments labeled "Permanent Press" or "Wrinkle
Free" or that indicate using a "Gentle" cycle on the care [abe[. This cycle combines low-speed
tumbling and low-speed spin to help reduce wrinkling.
Quick Wash
Use this cycle to wash small loads of lightly soiled garments that are needed in a hurry. This
cycle combines fast-speed tumbling, a shortened wash time, and extra high speed spin to
shorten drying time.
Handwash
Use this cycle to clean hand washable and special-care garments. Similar to the way garments
are hand washed in a sink, the wash action of this cycle combines periods of low-speed
tumbling and soaking. I.ow-speed spin helps reduce wrinkling.
Power Wash
Use this cycle to wash small loads of heavily soiled work wear such as overalls, coveralls,
sweatshirts, pants, and outdoor garments. This cycle combines warm water temperature,
optimal rinses and a longer cycle time to help ensure the removal of all soil and stains from
your laundry.
Clean Washer with AFFRESH
TM
Cycle
Use this cycle once a month to keep the inside of your washer fresh and clean. This cycle uses
a higher water [eve[ in combination with Affresh
TM
washer cleaner and steam, to thoroughly
clean the inside of your washer. This cycle should not be interrupted. See Cleaning Your
Washer in the Washer Care section.
IMPORTANT: Do not place garments in the washer during the Clean Washer cycle.
Rinse & Spin
Use this cycle to get a rinse and spin only. This cycle combines fast-speed tumbling and extra
high speed spin. If desired, you can reduce the spin speed by selecting the speed you want
from the Spin Speed modifier.
A Rinse & Spin cycle is useful for:
• I.oads that need rinsing only, like swimsuits.
NOTE: For more delicate loads, when using a Rinse & Spin cycle to rinse swimwear,
change the Speed Spin Modifier setting to Medium or I.ow to avoid fabric stress.
• Adding fabric softener to a load.
Drain & Spin
Use this cycle to drain your washer or to drain and spin your wash load. The spin speed is
preset to extra high. If desired, you can reduce the spin speed by selecting the speed you want
from the Spin Speed modifier.
NOTE: I.oads of synthetics, delicate fabrics, hand washab[es, and washable woolens should
be drained with no spin or low spin speed to avoid fabric stress.
Soak
Use the Soak cycle to remove small spots of set-in stains on fabrics. This cycle provides a soak
time with warm or cold water followed by drain. Extra water, a short tumbling phase for equal
distribution of the laundry, and a soaking time without drum movement improve the removal
of set-in stains. Drain without spin assures gentle treatment, even for delicate articles.
Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The
preset settings provide the recommended fabric care for the selected cycle. See chart.
Cycles Soil Level Water Temp Spin Speed
(cycle time)
Whitest Whites Normal Hot/Cold Max Extract
(1:20)
Heavy Duty Heavy Warm/Cold Max Extract
(1:20)
Normal/Casual Normal Warm/Cold High
(0:50)
Delicate Normal Warm/Cold Medium
(0:40)
Quick Wash I_ight Warm/Cold Max Extract
(0:30)
Handwash Normal Cold/Cold I.ow
(0:30)
Power Wash Heavy Hot/Cold Max Extract
(1:55)
Clean Washer N/A N/A N/A
with (1:05)
AFFRESH
TM
Rinse & Spin N/A Cold/Cold Max Extract
(0:22)
Drain & Spin Normal N/A Max Extract
(0:13)
Soak Normal Warm/Cold No Spin
(0:30)
To change the preset cycle settings
Press the selector of each setting until the desired setting illuminates.
Normal Washer Sounds
As with any new product, you will hear sounds that you are not accustomed to. You may hear
various sounds when the door is locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there wiI[ be momentary pauses. You
wiI[ hear water spraying and splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation.
| 8