Table of Contents
Advertisement
I
KX-F1200
WHITE LEVEL ADJUSI IVlI=NI I
1) Remove the CCD TOOL from CCL) ull_t.
2) Attach the white paper on the CCD unit.
3) Attach the CCD TOOL on the CCD unit.
4) Adjust VR801 on the CCD board so that th_ w_clorl_J b_u_J_._, _.2_, u.2V.
Notes:l.
After the adjustment is finished, assemble the unit by reversing above pr u_uurt_.
2. Please adjust with covering topside of the lens by hands in order not to let in outdou_ daylighL.
3. If you have no instrument to repair, trim off the chart on next page, then attach on the target gla_.
(This is a temporary treatment. You should use an instrument for this adjustment purpose, if you require _,_,
accurate repairment.)
CCD Tool
(PQZZF5OOM)
White Paper
(ex. PPC Paper)
WAVEFORM
_
1.2_+_U.2V
5. DOCUMENT
READ START
POSITION
ADJUSTMENT
1) Connect AC cord.
2) Copy the document, and confirm the read start position of the document.
3) If get out of position, adjust the read position.
4) Press the MENU button.
5) Press the #, 9, 0, 0, 0, _ and 5, 6, 3 buttons.
6) Press the r-I,I--I, SET and MENU buttons.
V
30
To move the image to the right direction
15 _--- Standard
(Default)
To move the image to the left direction
00
The starting position of reading shifts 1 mm as number of changes.
- 80 -
Advertisement
Chapters
Table of Contents
