Panasonic KX-F1200 Service Manual And Technical Manual page 13

i KX-r i 200
3. MAINI ENANUI-
3-1. CLEANING THE DOCUMENT FEEDER UNIT
When misfeeding occurs frequently or when dirty patterns or black bands appear on a copied or transmitted document, clean the
feeder rollers, sub roller, rubber flap, white plate and glass.
I Sub roller
Ru/bber flap
, Glass I-eerier rollers Lever
t
(1) Disconnect the power cord and the telephone
line cord.
(2)Slide the lever to open the front lid.
(3)Clean the feeder rollers, sub roller and rubber
flap with a cloth moistened with isopropyl
rubbing alcohol, then dry thoroughly.
(4)Clean the white plate and the glass with a dry
soft cloth.
(5)Olose the lid surely by pushing down on both
ends.
(6)Connect the power cord and telephone line
cord.
3-2. CLEANING THE THERMAL HEAD
If dirty patterns or black bands appear on a copied or received document, clean the thermal head.
Thermal
Do not push the black cover.
(1)Disconnect the power cord and the telephone
line cord.
(2)Open the top cover.
(3)Press the green button on the right marked
"PUSH" and lift up the head unit.
(4)Clean the thermal head with a cloth moistened
with isopropyl rubbing alcohol, then dry
thoroughly.
(5)Press the head unit down firmly until clicks into
place.
(6)Close the top cover surely by pushing down on
both ends.
(7)Connect the power cord and telephone line
cord.
Caution:
•To prevent malfunction due to static electricity, do not use a dry cloth and do not touch the thermal head directly with your
finger.
-13-