Panasonic KX-F1200 Service Manual And Technical Manual page 10

KX-F1200 I
Unused spool
FILM SUPPLY
Gears
Blue leader
(8)Insert the film into the cartridge so that the
arrow on the cartridge points in the same
direction as that on the film.
--If you insert a film which was used halfway,
insert the unused spool of the film on the
"FILM SUPPLY" mark of the cartridge.
Insert the film Incorrect (__)
cores correctly
referring to the Correct (_--(_
illustration to
the right.
(9)Roll the blue leader of the film by winding the
gears of the core until the leader is no longer
visible.
Tabs
(10) Close the covers of the cartridge by locking
the four tabs.
Green gear
Green holder
-10-
(11) Turn over the cartridge and referring to the
illustration on the left, place the "BACK" side of
the cartridge into the unit, by inserting the pins
on the sides of the green gears into the green
holders. Then lower the front of the cartridge
into place.
(12) Press the head unit down firmly until it clicks
into place.
(13) Close the top cover securely by pushing down
on both sides.
--If the blue leader of the film is not wound
completely, the unit will automatically
advance it and the following massage will
be displayed.
IL OADING FILM ]
--If the following message is displayed, the
film is not inserted in the cartridge correctly.
Ic,EoK F LM 1
Reinsert it correctly by referring to step 8 on
this page.