Panasonic KX-F1200 Service Manual And Technical Manual page 68

KX-F1200 j
Ref. No. 4
Procedure
4
HOW TO REMOVE THE THERMAL HEAD AND FILM SENSOR BOARD
1)
2)
3)
4)
5)
6)
7)
8)
9)
10) Replace the thermal head.
Open the top cover.
Push the green button on the right marked "PUSH" and lift up the thermal head block.
Remove the 2 screws (A) and remove the thermal head cover.
Pull out the 2 connectors.
Remove the thermal head block.
Remove the shaft.
Remove the film sensor board.
Remove the angle from the thermal head.
Remove the 2 screws (B) of thermal head and remove the guides.
Top Cover
®
®
Thermal Head Block
.=rmal H ead
Cover
Thermat
Guide-L
@Connector
Film Sensor Board
Shaft
- 68-
HOW TO CLEAN;
Clean the printing surface
ofthermal headwithol0th
soaking in alcohol.