Panasonic KX-F1200 Service Manual And Technical Manual page 12

Kx-P1200 I
2-1. MAINTENANCE LI_]
2
3
OPERATION
Document Path
Rollers
Platen Roller
Thermal Head
REMARKS
See page 13.
See pages 13,68.
r
CHECK ITEM
Remove any foreign matter such as paper.
If the roller is dirty, clean it with a damp cloth then dry thoroughly.
If the platen is dirty, clean it with a damp cloth then dry thoroughly.
Remove the paper before cleaning.
If the thermal head is dirty, clean the printing surface with a cloth
moistened with denatured alcohol (alcohol without water), then dry
thoroughly.
If the LED array is dirty, clean the glass with a dry soft cloth.
Paper sensor (PS904), Document sensor (PI302), Read position sensol
(PI301), Cover sensor (SWl), Paper top sensor (PS902), Paper out
Sensor (PS905), Film end sensor (PS901). Confirm operation of
sensors.
If the mirror and lens are dirty, clean it with a dry soft cloth.
Exchange the part.
Check the tightness of screws on all parts.
5 LED Array See page 13.
6 Sensors See pages 47-49.
Mirrors and Lens
Abnormal, wear
and tear or loose-
ness of parts
7
8
2-2, MAINTENANCE CYCLE
No. Items
1 Separation Roller
(Ref. No. 98)
2 Separation Rubber
(Ref. No. 48)
3 Feed Roller
(Ref. No. 97,178)
4 Target Glass
(Ref. No. 307)
5 Thermal Head
(Ref. No. 75)
6 Platen Roller
(Ref. No. 142)
Cleaning
Cycle Procedure
3 months See P. 13.
3 months See P. 13.
3 months See P. 13.
3 months See t_. 13.
3 months See P. 13.
3 months See P. 71.
Replacement
Cycle
7 years
(100,000 documents)
7 years
(100,000 documents)
7 years
(100,000 documents)
7 years
(100,000 documents)
7 years
(100,000 documents)
7 years
(100,000 documents)
l
Procedure
See P. 74.
See P. 65.
See P. 71.
See P. 68.
See P. 71.
Remarks
These values are only standard ones and may vary
depending on usage conditions.
-12-