KX-F1200
j
F IT is received after transmission of 2400BPS
training signal.
(
3.1
)
(1) Raise the level of transmission.
(Do not
raise the level above the standard of each
country. If the communication
should be
OK at the level beyond the standard, it is
attributable to line condition or the
receiver's machine sensitivity condition.)
If no effect is obtained.
(2) Slow down the transmission start speed
and transmit to the receiver again.
IT aoa'n.I
'_1 NO
Ask the receiver to perform FAX
communication
from the re-
ceiver to the caller.
Check if the line is not inter-
rupted by noises or in the cross
talk. If it is not, wait until the line
is satisfactory for correct com-
munication.
YES
END
J
- 24 -