Table of Contents
Advertisement
Back to Contents Page
System-Board Fan
Dell™ Inspiron™ One 19 Service Manual
Removing the System-Board Fan
Replacing the System-Board Fan
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface (such as a connector on your computer).
Removing the System-Board Fan
1. Follow the procedures in
Before You
2. Remove the I/O cover (see
3. Remove the computer stand (see
4. Remove the optical drive (see
5. Remove the decorative cover (see
6. Remove the speaker cover (see
7. Remove the display bezel (see
8. Remove the back cover (see
9. Remove the I/O bracket (see
10. Remove the inverter (see
Removing the
11. Remove the system-board shield (see
12. Turn the system-board shield over.
13. Remove the two screws that secure the system-board fan to the system-board shield.
14. Lift the system-board fan away from the system-board shield.
1
system-board fan
Begin.
Removing the I/O
Cover).
Removing the Computer
Stand).
Removing the Optical
Drive).
Removing the Decorative
Cover).
Removing the Speaker
Cover).
Removing the Display
Bezel).
Removing the Back
Cover).
Removing the I/O
Bracket).
Inverter).
Removing the System-Board
2
screws (2)
Shield).
Hide quick links:
Advertisement
Table of Contents
