Table of Contents
Advertisement
5. Connect your computer and all attached devices to electrical outlets, and turn them on.
Display Cable
Removing the Display Cable
1. Follow the procedures in
Before You
2. Remove the display panel (see
3. Turn the display panel over.
4. Lift the conductive tape that secures the display cable to the display-panel connector; press the securing clips on either side of the display-panel
connector and disconnect the display cable.
5. Lift the display cable off the display panel.
Replacing the Display Cable
1. Follow the procedures in
Before You
2. Slide the display cable into the display-panel connector until it is fully seated and secure the display cable with the conductive tape.
3. Turn the display panel over.
4. Replace the display panel (see
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
5. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
Begin.
Removing the Display
Panel).
Begin.
Replacing the Display
Panel).
Hide quick links:
Advertisement
Table of Contents
