Steg
1. Använd en skruvmejsel och ta bort Type-C-modulskyddet från chassit.
OBS:
Det här steget gäller endast när Type-C-modulen installeras för första gången.
2. Anslut Type-C-modulkablarna till kontakterna (VIDEO och TYPE-C) på moderkortet.
3. Sätt in Type-C-modulen i platsen på chassit.
4. Sätt fast de två (M3x3) skruvarna för att fästa Type-C-modulen på chassit.
Nästa Steg
1. Installera sidopanelen.
2. Följ anvisningarna i
När du har arbetat inuti
Moderkort
Removing the system board
Prerequisites
1. Follow the procedure in
2. Remove the
side
cover.
3. Remove the
front
bezel.
4. Remove the
2.5-inch hard drive
5. Remove the
3.5-inch hard drive
6. Remove the
disk-drive
7. Remove the
Optional I/O
8. Remove the
expansion
datorn.
Before working inside your
if applicable.
if applicable.
cage.
modules.
card.
Ta bort och installera enheter som kan bytas ute i fält (FRU:er)
computer.
101
Need help?
Do you have a question about the OptiPlex Small Form Factor Plus 7010 and is the answer not in the manual?
Questions and answers