Dell Inspiron One 19 Touch Service Manual page 59

Memory Channel Mode
Memory Type
Main
Service Tag Setting
System Time
System Date
SATA-0
SATA-1
SATA-2
Halt on Error
Keyboard Errors
Fan Errors
Advanced
CPU Information
Integrated Graphics Configuration
Integrated Peripherals Configuration
Bootup Num-Lock
Quick Boot
Power Management Features
Suspend mode
USB Wakeup From S3
Restore on AC Power Loss
Low Power Mode
Resume On LAN
Resume On RTC Alarm
Security
Unlock Setup Status
Supervisor Password
User Password
Change Supervisor Password
Change User Password
Boot Menu Security
Boot
1st Boot Device
2nd Boot Device
Indicates if the memory is in single or dual channel mode
Indicates the type of installed memory
Displays the service tag of the computer when the service tag is present
Displays a field to input the service tag manually when the service tag is absent
Displays current time in hh:mm:ss format
Displays the current date in mm/dd/yy format
Displays the SATA drive connected to the SATA-0 connector
Displays the SATA drive connected to the SATA-1 connector
Displays the SATA drive connected to the SATA-2 connector
Enabled or Disabled (Enabled by default)
Displays keyboard errors when set to Report
Default is Report
Displays fan errors when set to Report
Default is Report
Max CPUID Value Limit—Enabled or Disabled (Disabled by default)
l
Execute-Disable Bit Capability—Enabled or Disabled (Enabled by default)
l
Initiate Graphic Adapter—PEG/PCI
l
Video Memory Size—32 MB
l
DVMT Mode Select—DVMT Mode
l
DVMT/FIXED Memory—256 MB
l
ATA/IDE configuration—Disabled; Compatible; Enhanced (Enhanced by default)
l
USB Functions—Enabled or Disabled (Enabled by default)
l
USB Storage Function—Enabled or Disabled (Enabled by default)
l
Audio Controller—Enabled or Disabled (Enabled by default)
l
Wireless LAN—Enabled or Disabled (Enabled by default)
l
Integrated NIC—Enabled or Disabled (Enabled by default)
l
LAN Boot ROM—Enabled or Disabled (Disabled by default)
l
1394/Card Reader—Enabled or Disabled (Enabled by default)
l
Onboard Serial Port—3F8/IRQ4
l
Onboard Parallel Port—378/IRQ7
l
Parallel Port Mode—SPP
l
On or Off (On by default)
Enabled or Disabled (Enabled by default)
Specifies the suspend type
Default is S3
Enabled or Disabled (Enabled by default)
Off, On, or Last (Off by default)
Enabled or Disabled (Disabled by default)
Enabled or Disabled (Disabled by default)
Enabled or Disabled RTC to generate a wake event (Disabled by default)
Unlocked
Status of supervisor password installed
Status of user password installed
Allows to set the desired supervisor password
Allows to set the desired user password
Enabled or Disabled (Disabled by default)
Specifies the boot sequence from the available devices
Removable; SATA; USB; CD/DVD; Network; Disabled (Removable by default)
Specifies the boot sequence from the available devices