2. Align the screw holes on the inverter with the screw holes on the system-board shield. Replace the two screws that secure the inverter to the system-
board shield.
3. Connect the inverter cable and display cables to the connectors on the inverter.
4. Slide the tabs on the inverter shield into the slots on the system-board shield. Replace the two screws that secure the inverter shield to the system-
board shield.
5. Replace the back cover (see
6. Replace the display bezel (see
7. Replace the speaker cover (see
8. Replace the decorative cover (see
9. Replace the optical drive (see
10. Replace the computer stand (see
11. Replace the I/O cover (see
Replacing the I/O
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
12. Connect your computer and all attached devices to electrical outlets, and turn them on.