1
back cover
Replacing the Back Cover
1. Follow the procedures in
Before You
2. Lift the chassis from the clean surface.
3. Turn the chassis over and align the screw holes on the chassis with the screw holes on the back cover.
4. Replace the ten screws that secure the back cover to the chassis.
5. Replace the display bezel (see
6. Replace the speaker cover (see
7. Replace the decorative cover (see
8. Replace the screw that secures the back cover to the computer.
9. Replace the optical drive (see
10. Replace the computer stand (see
11. Replace the I/O cover (see
Replacing the I/O
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.
12. Connect your computer and all attached devices to electrical outlets, and turn them on.
Back to Contents Page
2
screws (10)
Begin.
Replacing the Display
Bezel).
Replacing the Speaker
Cover).
Replacing the Decorative
Cover).
Replacing the Optical
Drive).
Replacing the Computer
Stand).
Cover).