Modifiers; Soak Time; Water Temp - Maytag MHWE300VW00 Use & Care Manual

Soak Time
Use the Soak Time option to remove small spots or stains on fabrics. This option provides up
to a 30-minute soak time prior to the start of the selected cycle.
Using the Soak time option
The soak time option provides a soak time with warm or cold water followed by drain.
1. Select the desired cycle.
2. Choose the desired temperature.
3. Select soak.
Select and hold START/PAUSE (approximately 1 second).
Preset cycle settings of Soil I.evel (cycle time), Wash Temperature, and Spin Speed can be
changed. You can change these settings by using modifiers. Modifiers can be changed before
or during the cycle until that part of the cycle starts. Not all modifiers are available with all
cycles and options.
extra high
ATC hot _ high
heavy m ATCwarm rinse _ medium
normal _ ATC warm _ low
I tight _ cold _ no spin
o,,,0v0, ] [ 0sht0mp J Isp,ns0000 ]
modifiers
To change Soil I.evel (cycle time), select the SOIl. I.EVEI. button until the desired setting
illuminates.
To change the water temperature, select the WASH TEMP button until the desired setting
illuminates.
To change the spin speed, select the SPIN SPEED button until the desired setting
illuminates.
Water Temp
Select a water temperature based on the type of load you are washing. Use the warmest wash
water safe for fabrics. Follow garment label instructions.
Warm rinses leave the loads drier than cold rinses. Warm rinses increase wrinkling. In cold
climates, a warm rinse makes the load more comfortable to handle. Cold rinses save energy.
• In wash water temperatures colder than 60°E (15.6°C), detergents do not dissolve well.
Soils may be difficult to remove.
Wash Water Temperature Suggested Fabrics
Wash Water Temperature Suggested Fabrics
HOT Sturdy colorfast fabrics
Whites and pastels
Heavy soils
WARM Bright colors
Moderate to light soils
COLD Colors that bleed or fade
light soils
In wash water temperatures colder than 60°F (15.6°C), detergents do not dissolve weft.
Soils may be difficult to remove.
Automatic Temperature Control
The automatic temperature control electronically senses and maintains a uniform water
temperature. Automatic temperature control regulates incoming hot and cold water.
Automatic temperature control is automatically turned On when a cycle is selected.
See "Preset Cycle Settings" in Cycles.
• Automatic temperature control works for all wash and rinse temperature settings.
iiiiiiiii!i
Z'I