Preset Cycle Settings; Normal Washer Sounds; Signal On/Off; Max Extract - Maytag MHWE300VW00 Use & Care Manual

Preset cycle settings
Each cycle has a preset Soil Level (cycle time), Water Temperature, and Spin Speed. The
preset settings provide the recommended fabric care for the selected cycle. See chart.
Cycles Soil Level Water Temp Spin Speed
(cycle time)
Whitest Whites Normal Hot/Cold Extra High
(1:35)
Heavy Duty Normal Hot/Cold Extra High
(1:10)
Normal/Casual Normal Warm/Cold High
(0:50)
Quick Wash I_ight Warm/Cold Extra High
(0:30)
Delicate Normal Cold/Cold I.ow
(0:40)
Sanitary Normal Hot/Cold Extra High
(1:50)
Clean Washer N/A N/A N/A
(1:05)
Rinse&Spin N/A Cold/Cold Extra High
(0:22)
Drain&Spin N/A N/A Extra High
(0:13)
To change the preset cycle settings
Press the selector of each setting until the desired setting illuminates.
Normal Washer Sounds
As with any new product, you will hear sounds that you are not accustomed to. You may hear
various sounds when the door is locked and unlocked, and during the washing, rinsing, and
spinning process. Between changes in wash actions, there will be momentary pauses. You
will hear water spraying and splashing during the wash and rinse cycles. These new sounds
and pauses are part of normal washer operation.
You can customize your wash by adding options to your cycle selections. You can add or
change an option after starting a cycle anytime before the selected option begins. Not aI[
options are available with all cycles.
power • cancel normal,
casua|
delicate
start • pause
dut' quick wash
whitest
whites sanitary
:lean washer
]
with a_[t,_
signaton°, drain & spil Joor locked
off
press pause to unlock
rinse & spin
maxextract }
[ }
options
See the "l.aundry Guide" for an overview of possible options for each Wash Cycle
selection.
You can select more than one option for a cycle. Some options cannot be added to some
cycles; for example, Soak Time cannot be added to the Quick Wash cycle.
If an option is available with a selected cycle, the light for that option will illuminate
when selected.
If an option is unavailable with a selected cycle, there will be a short tone, and the light
for that option will not illuminate when selected.
Signal On/Off
Use this option to turn the buzzer indicating the end of the cycle on or off.
Max Extract TM
Use this option to add an additional spin to any cycle to improve drying times for some heavy
fabrics by reducing excess water; which may save energy.
Extra Rinse
A second rinse can be used to aid in the removal of detergent or bleach residue from
garments. This option provides an additional rinse with the same water temperature as the
normal rinse. This is the default rinse setting for the Whitest Whites cycle.
| 8