Assistance Or Service; Cycle Too Long - Maytag MHWE300VW00 Use & Care Manual

Was the wash temperature too low?
Use hot or warm washes if safe for the load. Make sure your hot water system is adequate
to provide a hot water wash.
Did you use enough detergent, or do you have hard water?
Use rnore detergent for washing heavy soils in cold or hard water.
Cycle too long
Did you choose the Whitest Whites cycle?
The heater will be activated to provide maximum cleaning performance. Additional time
will be added to the regular cycle to heat the water. This additional time will depend on
the load size and the hot water inlet temperature.
• Is "SUD" shown in the display?
Excessive sudsing has been detected and a suds routine has been started to destroy
excessive suds. This routine will add time to the original cycle.
Did you wash a large load using the Quick Wash cycle?
The Quick Wash cycle is designed for srnaller load sizes (2-3 iterns of lightly soiled
garments). If larger loads are washed using this cycle, wash time will be increased.
Did you wash a large load using a gentle cycle?
When using the Delicate cycle, you should wash small loads. This ensures a gentle wash
for your garments without increasing cycle times.
Did the load cause imbalance?
When too much imbalance occurs, an imbalance routine will start to redistribute the
load. During the imbalance routine, the time displayed may pause until this activity is
complete, then resume with the remainder of the cycle.
Door locked at end of wash cycle
Did all of the water drain out of the washer during the spin?
Select I)RAIN & SPIN to rernove any water rernaining in the washer. The washer door will
unlock at the end of the drain.
ASSISTANCE OR SERVICE
Before calling for assistance or service, please check "Troubleshooting." It may save you the
cost of a service ca[[. If you still need help, follow the instructions below.
When calling, please know the purchase date and the complete mode[ and serial number of
your appliance. This information will help us to better respond to your request.
If you need replacement parts
If you need to order replacernent parts, we recornrnend that you use only factory specified
parts. Factory specified parts will fit right and work right because they are made with the same
precision used to build every new Maytag _k_ a ppliance.
To locate factory specified parts in your area, ca[[ the Maytag Services, I.I.C Customer
Assistance telephone number, or your nearest designated service center.
Call the Maytag Services, I.I.C Customer Assistance toll free: 1-800-688-9900.
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
• Installation information.
• Use and maintenance procedures.
• Accessory and repair parts sales.
• Specialized customer assistance (Spanish speaking, hearing impaired, limited vision,
etc.).
• Referrals to local dealers, repair parts distributors, and service companies. Maytag _k_
appliances designated service technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in the United States.
To locate the Maytag <"appliances designated service company in your area, you can also
look in your telephone directory Yellow Pages.
For further assistance
If you need further assistance, you can write to Maytag _ appliances with any questions or
concerns at:
Maytag Services, I.I_C
ATTN: CAIR _ Center
P.O. Box 2370
Cleveland, TN 37320-2370
Please include a daytime phone number in your correspondence.
Call the Whirlpool Canada I_P Customer experience Centre toll free: 1-800-807-6777.
Our consultants provide assistance with:
• Features and specifications on our full line of appliances.
• Use and maintenance procedures.
• Accessory and repair parts sales.
• Referrals to local dealers, repair parts distributors, and service companies. Whirlpool
Canada I_Pdesignated service technicians are trained to fulfill the product warranty and
provide after-warranty service, anywhere in Canada.
For further assistance
If you need further assistance, you can write to Whirlpool Canada I.P with any questions or
concerns at:
Customer eXperience Centre
Whirlpool Canada I_P
1901 Minnesota Court
Mississauga, Ontario 1_5N 3A7
Please include a daytime phone number in your correspondence.