Cycle Settings - Maytag FRONT-LOADING AUTOMATIC WASHER W10254495A Use And Care Manual

Front-loading automatic washer
Table of Contents

Advertisement

Available languages

Available languages

CYCLE GUIDE — SPECIAL-PURPOSE CYCLES
Settings and options shown in bold are default settings for that cycle. For best fabric care, choose the cycle that best fits the
load being washed.
Not all cycles and options are available on all models.
For best performance, not all settings are available with each cycle, and some options cannot be used together.
Items to wash
Cycle:
using default

cycle settings:

Small loads of 3 - 4
Small Load
lightly soiled garments
Swimwear, items
Rinse/Drain
that need rinsing only
& Spin
Wet load of clothes
Rinse/Drain
& Spin
Heavily soiled garments
No clothes in washer
Clean Washer
with affresh
* All temperature selections feature a Cold rinse, except Warm/Warm, which features a warm wash and a warm rinse.
Load Size Recommendations
For best results, follow the load size recommendations noted for each cycle.
Wash
Temperature*:
Hot
Warm/Warm
Cold
Warm/Cold*
Warm/Warm
Cold
N/A
Soak
Warm/Cold*
Warm/Warm
Cold
®
Small load: Fill the washer drum with 3-4 items, not more than 1/4 full.
Medium load: Fill the washer drum up to about 1/2 full.
Large load: Fill the washer drum up to about 3/4 full.
Extra-large load: Fill the washer drum, but make sure clothes can tumble freely.
For best results, avoid packing tightly.
Spin
Soil
Available
Speed:
Level:
Options:
High
Heavy
Extra Rinse
Normal
Medium
Fresh Hold
Low
Light
Delay Start
Extra Low
High
Extra Rinse
N/A
Medium
Max Extract™
Low
Fresh Hold
Extra Low
Delay Start
No Spin
High
N/A
Max Extract™
Medium
Fresh Hold
Low
Delay Start
Extra Low
No Spin
Extra Heavy
Fresh Hold
Heavy
Delay Start
Normal
Light
Cycle Details:
For small loads (3-4 items) needed
quickly. This cycle combines
®
high-speed tumbling, a shortened
wash time, and a high-speed spin
for reduced drying times.
This cycle adds water, then uses
high-speed tumbling and an extra
high-speed spin. For some fabrics,
®
you may wish to set the spin speed
to a lower setting.
Use Drain & Spin to remove excess
water from the load by choosing
®
Rinse/Drain & Spin and turning off
Extra Rinse. Spin speed can be set
to a lower setting.
Provides an extended soak without
®
a final spin to help loosen tough
stains prior to a wash cycle.
Use this cycle every 30 washes to
keep the inside of your washer fresh
and clean. This cycle uses a higher
water level. Use with affresh
Washer Cleaner tablet or liquid
chlorine bleach to thoroughly clean
the inside of your washer. This cycle
should not be interrupted. See
"Washer Care."
IMPORTANT: Do not place
garments or other items in the
washer during the Clean Washer
with affresh
cycle. Use this cycle
®
with an empty wash tub.
®
9

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mhw6000xwMhw6000xrMhw6000xgMhw7000xwMhw7000xrMhw7000xg

Table of Contents