Installation; Window & Mobile Installation; Window Adapter Application - Maytag 23-11-2222N-001 User Manual

installation .o o0,oooo o0, o oo 0 o oooo o0 oooo o0 o oo 0 o0 o.
Window installation
1. Place the nozzle in the exhaust tube (Fig. 4a).
2. Open the window and place the window adapter
in the window, extending it to fit the width of
the window, close the window (Fig. 4b).
3. Secure the window adapter to the window sill
(Fig. 4c).
4. Insert the nozzle into the slot in the window
adapter (Fig. 4d).
5. Select a cooling mode; normal cool or high cool
(Fig. 6).
6. Adjust to the desired temperature setting.
7. Air direction can be adjusted using the handle
found on the top of the control panel.
Cooling Through a Door Application
Mobile Installation
1. Place the nozzle in the exhaust tube.
2. Open the door slightly and position the
nozzle between the door and the door
jamb (Fig. S).
3. Select a cooling mode; normal cool or
high cool (Fig. 6).
4. Adjust to the desired temperature setting
(Fig. 6).
S. Air direction can be adjusted using the
handle found on the top of the control
panel.
Important: Do not over-stretch the exhaust tube or make any
unnecessary bends in it.
3