Bottom Drain Valve; If The Unit Fails To Start; If The Unit Does Not Cool Sufficiently; If The Unit Is Too Loud - Maytag 23-11-2222N-001 User Manual

Nlaintenance o o ooo, o ooo, o ooo, o ooo, o ooo,
Before using at the start of a season
* Turn the unit on for four to five hours to dry it out.
* Clean the air filter.
* Clean the cabinet and air discharge areas if necessary.
When transporting the unit or storing the unit
after the season
Drain excess water from the bottom tank by placing a pan under
the lower drain valve, remove the drain plug, and let the water
drain into the pan. When the water stops draining out, replace
the drain plug and remove the pan of water (Fig. 10). To drain
water using the upper drain valve refer to the section entitled
"Draining the Water".
Service instructions
Read carefully before calling for service
if the unit fails to start
¢" Make sure the unit is plugged into an outlet.
¢" Make sure the unit is not in the off position.
¢" Make sure the circuit breaker has not been tripped.
if the unit does not function and the drain water light is blinking
¢" Make sure the unit is standing level, if the light is still on, empty the internal water tank.
(See the section on Draining Water).
if the unit does not cool sufficiently
¢" Make sure the exhaust tube and nozzle fit correctly to each other and to the window adapter.
¢" Make sure the exhaust tube is not bent.
¢" Make sure the upper drain valve is in the closed position and both drain plugs are in place.
¢" Adjust the thermostat to a lower temperature.
¢" Make sure the exhaust tube and nozzle have nothing inside them.
if the
V"Make
V"Make
unit is too loud
sure the exhaust tube and nozzle fit correctly to each other and to the window mount.
sure the exhaust tube and nozzle have nothing inside.
Any other breakdown or repair must be carried out by an authorized servicer.
To locate your nearest Service Center, call 1-866-MAYTAG1.
7