Parts List; Filler Panel Installation - Maytag 23-11-2198N-005 User Manual

Installation°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°°
Wi dew I staHatie
Parts List
Electronic Cabinet
Control Panel
Filter
Filler Panel
installation in window
23" to 36" wide
1. ()pen and mark center line of window. Measure and
mark 8 3/4" to the right of the center line and 8 3/4" to
the left of the center line (Fig. FL
Fig° F
I I
Co, ltcr
_8 3/4"_8 3/4"_-
m m
( i
I I
Filler Panel Installation
1. Place tabbed side (Fig° C} of curtain in tracks on side of
air conditioner cabinet, and slide down the tracks until
the curtain is even top and bottom (Fig. DL
_o C Tal,bed E_{4e _o _ Lock Eg{{e
2. Place bracket so that the outside edge rests on the
appropriate 8 3/4" mark, and the back of the bracket is
at the edge of the window sash. Secure brackets with
two (2) 1" long wood screws (Fig. G).
F_ G 1" Long 14_)od Screws
Tabbed
Lock E_(e
2. Slide the filler panel frame onto
the air conditioner cabinet using
the tracks on the top and bottom
of the unit. Slide the frame as
close to the air conditioner as pos-
sible so that the curtain locks into
place. Gently pull the frame out
until it is the correct length for
your application (Fig. E).
Hgo E
Cm'tain
Track
3. To overcome storm window interference, securely
attach 2" wide wood strips to the window stool and sill,
with either nails or screws. Strips should be as long as
window opening and flush with back side of stool.
Thickness of strips should be controlled by amount of
interference
(Fig. 14).
_o _ Air Conditioner Base Storm l/gindow
Fralrle
2
SIDE VIEW Wood Strips