Kenmore 11098762790 Owner's Manual And Installation Instructions page 60

Problem Possible Cause Solution
Lint in Load Lint screen is clogged. Clean lint screen. Check for air
movement.
Improper sorting. Sort lint givers from lint takers
and by color.
Load is too big or heavy. Dry smaller loads so lint can be
carried to the lint screen.
Load is overdried. Use correct dryer settings for fabric.
Overdrying can cause lint-attracting
static (see "OPERATION").
Paper or tissue in pockets. Clean out pockets before drying.
Pilling being mistaken for lint. Pilling (surface fuzz) is caused by
normal wear and laundering.
Stains on Load Improper use of fabric softener Use fabric softener sheets in dryer.Add
in washer, at beginning of cycle when load is cold.
Drying soiled items. Items need to be clean before
being dried.
Items Overdrying. Match dryer settings to fabric type
Shrinking (see "OPERATION").
Poor garment quality. Check quality of garment before
purchasing.
Manufacturer's care label Follow fabric care label instructions
instructions not followed, carefully.
Loads are Overloading. Dry smaller loads that can tumble freely.
Wrinkled
Overdrying. Match dryer settings to fabric type
(see "OPERATION").
Load left in dryer at the Remove load as soon as tumbling
end of cycle, stops.
Odors Household chemicals, paint. Do not use dryer while these chemical
or varnish being drawn into fumes are in the air.
dryer.
Gas Leak Turn off gas supply line. Leave your
house, then call your local gas
company.
Unusual Clicking (Gas Dryers) - Normal operation.
Sounds gas valve clicking.
Thumping of rollers when Thump will go away after 5 minutes
laundry center has set. of drying.
60