Stopping/Restarting Yourwasher - Kenmore 11098762790 Owner's Manual And Installation Instructions

To get the maximum cleaning and
fabric care from your washer, please
read and follow these instructions.
Explosion Hazard
Never place items in the washer
that are dampened with gasoline
or other flammable fluids.
No washer can completely
remove oil.
Do not dry anything that has ever
had any type of oil on it (including
cooking oils).
Failure to follow these instructions
can result in death, explosion,
or fire.
STARTING YOUR WASHER
STEP 1. Add measured detergent
directly into washer basket. Then place
a load of sorted clothes in the washer.
STEP 2. (OPTIONAL STEP) If desired,
add measured liquid chlorine bleach to
the liquid bleach dispenser (see page 38).
STEP 3. (OPTIONAL STEP) If desired,
add measured liquid fabric softener to the
fabric softener dispenser (see page 39).
STEP 4. Close washer lid.
STEP 5. Set WATER LEVEL Control_
based on the size of your wash load
(see page 34).
STEP 6. Set WATER TEMP Control_)
(see page 34).
STEP 7. Push the Cycle Selector
Control (Timer) Knob(_in and turn
to the right to desired cycle and time
(see pages 35-36).
STEP 8. Pult the Cycle Selector Control
(Timer) Knob out. The dial wilt rotate
as the cycle progresses. The knob will
not rotate.
STOPPING/RESTARTING
YOURWASHER
• To stop the washer at any time, push
the Cycle Selector Control (Timer)
Knob in.
• Pull the knob out to restart.
®
O •
33