Carefully lift the LCD panel out of the LCD unit. Holding the LCD panel, disconnect cables
3.
as follows:
Disconnect the LCD video cable from the rear of the LCD panel (not shown).
Unplug four power inverter cable connectors from the inverter board (see the following
figure).
way of the panel before securing the LCD panel to the LCD unit.
A – Black/Blue Cable Connector Set
B – White/Pink Cable Connector Set
Power Inverter Board Removal
Remove the power inverter board follows.
Remove the LCD panel (see the previous section, "LCD Panel Removal").
1.
2.
Disconnect the power cable from the inverter board.
Remove the two screws securing the inverter board to the LCD base unit.
3.
3-18 Disassembly and Reassembly
Take care when reassembling the LCD panel. Route cables out of the
Disconnecting LCD Panel Cables
C – Power Inverter Board