Optical Drive Bracket Assembly; Removing The Interface Board Assembly; Removing The Optical Drive Bracket Assembly - NEC POWERMATE eco Service And Reference Manual

2. Remove the interface board assembly as follows.
Remove four screws that secure the board to the bottom base plate. Lift the assembly
off the base plate.
Remove two screws securing the interface board to the assembly. Carefully slide the
board out from the connector panel
A – Screws to Bottom Base Plate (4)

Optical Drive Bracket Assembly

Remove the optical drive bracket assembly as follows.
Remove the bottom base plate and disconnect the interface board cables (see the previous
1.
section, "Interface Board Assembly Removal").
Remove the four screws securing the bracket assembly to the bottom base plate. Remove
2.
the bracket assembly.
A – Optical Drive Bracket Assembly
3-24 Disassembly and Reassembly

Removing the Interface Board Assembly

Removing the Optical Drive Bracket Assembly

B – Screws to Board Assembly (2)
B – Screws (4)