Appendix D
1. Installing New Rack-mount Kit (Accessory)
on NEC Storage Rack
NOTE:
installed on the left part of a rack when the rack is viewed from
its front.
Install a rail on the right part of the rack in the similar
procedure.
The left and right rails are different from each other. Use the
correct rail when installing it on the rack. (See the figure
below.)
For each rail, assume the face with the inner as the rear (see the
figure below).
Front
Installing Unit on Rack
The following procedures supposes that a rail is
Upper : Rail(R)
Lower : Rail(L)
Rail(L)
D-1
Inner
Rear