Addition Of Power Control Card - NEC S1400 NF1400-SR40E User Manual

6.4

Addition of Power Control Card

 Store the product in an area where high temperature do not occur and the
difference between the high and low temperatures is not large. Do not store the
product in a place with high humidity and/or much dust.
 Note that foreign substances such as water and metal may not be entered into the
product during storage. Failure to follow it may cause device failure, electric shock,
and/or fire to occur.

Store the product into the shipping package during storage.
The disk array unit can contain an additional power control card. The scheduled stop procedure can be
performed in remote mode by additionally installing the power control card for connection with the
host power control unit and controlling the disk array unit through the host power control unit. The
power control card can be additionally installed while the power switch on the disk array unit is ON.
The power control card is an option exclusively used with the NF1400-SR40E.
 For the NF1400-SR40E only
Product name: Power control card Model number: NF1400-SP03E
CAUTION
6-19