Table of Contents
Advertisement
2. Confirmation of Unit Setup
2.1
Activation on Modification of FC Port Configuration
If any of the items described in "1.2.1 Port Configuration" is modified, the activation is
required.
After selecting [3. PANEL] → [1. Port On/Off Switch], remove the check(s) of the deselected
port(s) to set them to offline. Next, check the port(s) to be selected newly to set them online.
Set the on/off status of the host ports on the CONT card.
Port On/Off Switch
Remove the check of port to be deselected and click "SET" → Offline
Add the check of port to be selected and click "SET" → Online
The unit OFF/ON can provide the same effect.
Feature of Port On/Off with host (Only mounting ports appear.)
CONT0 HP0
CONT0 HP1
CONT1 HP0
CONT1 HP1
C-11
Advertisement
Table of Contents
