Table of Contents
Advertisement
16. Push down the power cord stopper to the left, connect the power cord, and securely fit the
power cord stopper into the power cord socket.
NOTE:
supply is different from the figure above, connect the power
cord according to the procedure below.
As shown in the left figure below, open the AC cable clamp, fit the power cord into it, and
lightly lock the clamp.
As shown in the right figure below, move the clamp in the direction indicated by the arrow,
and firmly secure the clamp near the root of the plug.
NOTE:
come off. To prevent this problem, firmly secure the AC cable
clamp near the root of the power cord.
17. Turn ON the power switch on the new power supply.
If the shape of the power cord stopper of the power
Fit
AC cord
Spread
Clamp section
If the clamp is loosely locked, the power cord may
8-15
Advertisement
Table of Contents
