NEC S1400 NF1400-SR40E User Manual page 127

The screen can be used to set the resource type. On the DE columns, set the locations of
installed DEs. The information on the DEs with their check buttons checked is only set.
Select the PCC mode (No Present, UPS Only, UPS+AOC, or UPS+AOC+SCBI) in the PCC
field. (See the DE location view on the next page for the DE locations.)
DE01 - DE0D
PCC
PS 48V
Product Name
Serial Number
Port WWN
DE number
PCC mode
0: No present
1: UPS only
2: UPS+AOC
3: UPS+AOC+SCBI
NF1400-SR40E: Select "0" if optional NF1400-SP03E is not installed.
Select "2" if optional NF1400-SP03E is installed.
NF1400-NR40E: Select "0" if optional NF1400-NP03E is not installed.
Select "2" if optional NF1400-NP03E is installed.
Checked at the time of 48V power supply use.
When it is judged that there is no configuration information in the
system disks, this information (default value) is displayed and stored
to the system disks by clicking of the "SET" button.
C-9