Primary/Secondary Ide Master And Slave Submenu - NEC EXPRESS5800 LC1400 series User Manual

Primary/Secondary IDE Master and Slave Submenu

Feature Choices
Type Auto
None
CD-ROM
User
Cylinders 0 to 65535
Heads 1 to 16
Sectors 0 to 63
Maximum N/A
Capacity
Multi-Sector Disabled
Transfer 2, 4, 8, or 16
sectors
LBA Mode Disabled
Control Enabled
32 Bit I/O Disabled
Enabled
Transfer Mode Standard
Fast PIO 1
Fast PIO 2
Fast PIO 3
Fast PIO 4
FPIO 3/DMA 1
FPIO 4/DMA 2
Ultra DMA Disabled
Mode Mode 0
Mode 1
Mode 2
3-6 Configuring Your System
Description
Auto allows the system to attempt auto-
detection of the drive type.
None informs the system to ignore this
drive.
CD ROM allows the manual entry of some
fields described below.
User allows the manual entry of all fields
described below.
Number of cylinders on drive. This field is
changeable only for Type User.
Number of read/write heads on drive. This
field is changeable only for Type User.
Number of sectors per track. This field is
changeable only for Type User.
Computed drive size. This field is
informational only for Type User.
Determines the number of sectors per
block for multi-sector transfers. This field
is informational only for Type Auto.
Enabling LBA causes logical block
addressing to be used in place of
cylinders, heads, and sectors. This field is
informational only for Type Auto.
Enabling allows 32 bit IDE data transfers.
Selects the method for moving data to and
from the drive. This field is informational
only for Type Auto.
Selects the Ultra DMA Mode for moving
data to and from the drive.
Your Setting