Recommended Resource Settings - NEC EXPRESS5800 LC1400 series User Manual

Recommended Resource Settings

The following table shows the recommended RCA system board settings for a
sample system and provides a place for you to record any changes you make to
the settings.
SYSTEM GROUP
System Identification and Version
Information
SSU Configuration File Version
MP Spec. Version
Processor Speed Setting
MEMORY SUBSYSTEM GROUP
Extended Memory Options
ON-BOARD DISK CONTROLLER
GROUP
On-board Floppy Controller
On-board IDE Controller
ON-BOARD COMMUNICATIONS
DEVICE GROUP
Serial Port 1 Configuration
Serial Port 2 Configuration
Parallel Port Configuration
Parallel Port Mode
FLOPPY DRIVES GROUP
Floppy Drive A Option
Floppy Drive B Option
IDE DEVICES GROUP
IDE 32-Bit I/O
KEYBOARD GROUP
Numlock
Key Click
Typematic Speed
Typematic Delay
SCSI ROM BIOS GROUP
Embedded SCSI Devices Option
ROM
Scan
NORMAL SETTING
Display Only
V 1.4
3.5 X Bus Speed
Use BIOS Setup Utility
Enable
Enable Primary and
Secondary
3F8h – IRQ4
2F8h – IRQ3
378h – IRQ7
Extended Capabilities,
Port DMA 1
3.5 1.44/1.25 MB Drive
Disabled or not installed
Enable
OFF
Disable
30CPS
500 MS Delay
Enable
YOUR CONFIGURATION
System Setup Utility B-11