NEC Storage Manager Reference page 95

Chapter 2 Command Reference
-init
-list
-export
-import
file_name
-dskn disk_number
-all
-?
Initializes the signature on the physical disk. If -all is
specified, signature information of all disks is initialized.
If disk_number is specified, only the signatures of the
target physical disks are initialized.
Displays the list of disk signatures saved by -read,
signatures on the physical disk, and signatures saved in
the disk array. If -all is specified, signature
information of all disks is displayed. If disk_number
is specified, only the signatures of the target physical
disks are displayed.
Writes the disk signature information to the specified file.
If -all is specified, signature information of all disks is
written to the file. If disk_number is specified, only
the signatures of the target physical disks are written to
the file.
Reads the disk signature information recorded in the
specified file from the file and registers it. If -all is
specified, signature information of all disks is read from
the file and registered. If disk_number is specified,
only the signatures of the target physical disks are read
from the file and registered.
Specify the file name to which the disk signature
information is written, or from which it is read.
Specify the disk number of the physical disk to which the
disk signature operation is performed.
Performs the disk signature operation for all the physical
disks connected to the host.
Displays the usage of this command.
90