NEC Storage Manager Reference page 121

Chapter 2 Command Reference
[ NOTES ]
The target MV and RV must be set as a pair.
The MV must exist in the disk array which is under control of the self system.
The target MV must be already registered in the volume list.
The disk array that stores the specified MV and RV is not in the freeze state.
The activity state of the target pair is Separate, but not in the Separate Execution.
The target MV and RV volumes must be the basic volumes. Dynamic disk volumes cannot be
specified.
The semi-synchronous copy mode cannot be specified for the pair volumes that are allocated in
the same disk array. To specify the semi-synchronous copy mode, use the pair volumes that
are allocated in different disk arrays.
Other applications or services do not use the target MV.
Data files and log files included in the database exist in the target RV.
When specifying the -db option, there is only one database in the target MV.
When specifying the -dbfile option, all databases in the target MV must be specified.
The specified location for the metafile is not in the volume in which database data files and log
files are stored.
A metafile does not exist in the target MV.
When specifying the -dbfile option, the database name must be unique.
Path
RV:physical-disk-no
Volume_name
Path
MV' and RV's physical disk number, logical disk name, OS type
Mount point volume name
Drive letters or path name of the NTFS folder
Restore Start
Restore start message and start date
Restoring.....
Message that appears during Restore execution
Restore Normal End
Restore end message and end date
SnapshotRestore Normal End
Snapshot Restore end message and end date
ld_name
YYYY/MM/DD hh:mm:ss
YYYY/MM/DD hh:mm:ss
YYYY/MM/DD hh:mm:ss
116
type