NEC Storage Manager Reference page 44

2 . 2 . 3 i S M r c
2 . 2 . 3 i S M r
2 . 2 . 3 i S M r
[ NAME ]
iSMrc_restore - Starts copy from RV to MV.
[ SYNOPSIS ]
iSMrc_restore
iSMrc_restore
iSMrc_restore
iSMrc_restore
[ DESCRIPTION ]
The iSMrc_restore command copies data from the paired RV to MV.
When the system directly controls the I/O issuance to disk arrays, on the Windows system,
unmount MV, flush the file system buffer, and then start Restore. After starting Restore,
re-mount the MV. On the UNIX system, if MV's file system has been mounted, the system does
not start Restore and terminates operation abnormally. Therefore, it is necessary to unmount the
MV's file system before executing Restore.
OPTIONS
The iSMrc_restore command recognizes the following options and arguments.
-mv volume
-mvflg mv_flg
_ r e s t o r e
c _ r e s t o r e
c _ r e s t o r e
-mv volume -mvflg mv_flg
[-rv volume -rvflg rv_flg]
[-cprange copy_range] [-cpmode copy_mode]
[-rvacc rv_access] [-wait [second] | -nowait]
[-mode operation_mode ]
-file file_name
[-cprange copy_range] [-cpmode copy_mode]
[-rvacc rv_access] [-wait [second] | -nowait]
[-mode operation_mode ]
-?
-help
Specify volume of MV.
For information about the volume and volume types, refer
to 1.2 "Volume Types".
Specify the volume type specified in -mv.
This argument must be specified with -mv.
For information about the volume and volume types, refer
to 1.2 "Volume Types".
39
Chapter 2 Command Reference